PRODUCTS

Dritech Chemicals | Moving Forward With Innovation

Protective Coatings

The Dri-Gard series consists of various anti-carbonation, anti-corrosion, primers and corrosion treatment coatings that are suitable to be used on both  concrete & metal substrates. 

One-part, UV-curing acrylic dispersion with excellent weather resistance and crack-bridging properties. DRI-GARD AC-500 is specifically designed for exposed areas, with an excellent resistance to dirt retention, fungi and algae growth. DRI-GARD AC-500 forms a flexible & breathable barrier and protects it substrate against carbonations, etc.
(Available in many conventional as well as modern vibrant shades)

Application Area:
– Facades
– Concrete piers
– Internal & external areas
– Segmental box girders
– Overhead bridges

Click here to view Product Data Sheet

One-part, low VOC elastomeric protective coating system based on the latest technology in acrylate dispersion. When fully cured, it forms a flexible finish which is slightly breathable but impermeable to water & atmospheric gases. Dri-Gard AC 800 meets the requirements of EN 1504-2 CE. 

Application Area:
– Concrete protection against aggressive pollutants
– Surface protection for non-accessible & non-driven on exterior areas
– Architectural colour design on fair-facade concrete surfaces
– Areas with de-icing salts
– Bridges & infrastructures

Click here to view Product Data Sheet

Click here to view 3rd party test report

Dri-Gard AS-388 is a single-packed, transparent, anti-sticker coating. It is specially formulated to prevent illegal & indiscriminate advertising adhesion on most surfaces, and repels all pressure sensitive adhesives such as paper and vinyl tapes and stickers. 

Application Areas:

  • Façade
  • Road signs
  • Bridges
  • Walls
  • Metal, wood, concrete, plastic substrates

Click here to view product data sheet

Dri-Gard EP 1800 is a 2-component, epoxy phenolic/novolac (EPN) lining that is specially designed to protect concrete  & steel structures against aggressive chemicals, salts and solvents, such as 98% sulphuric acid, 85% phosphoric acid, xylene, and so on.

Application Areas:

  • Chemical manufacturing facilities
  • Wastewater treatment plants
  • Offshore & onshore internal linings
  • Buried tanks & pipes
  • Desalination plants
  • Petrochemical refineries

Click here to view product data sheet

One-part water repelling impregnator for absorbent cementitious substrates. It penetrates into open pores of the substrates and effectively provides water repellency, while still allowing water vapour diffusion in both directions. DRI-GARD CP-700/750 can also be used as a colourless protective surface treatment. It may be used as a hydrophobic primer under solvent-based or emulsion protective coating.
(DRI-GARD CP-700: solvent-based, DRI-GARD CP-750: water-based)

Application Area:
– Absorbent cementitious substrates
– Concrete
– Cementitious rendering
– Concrete tiles
– Fibre cement
– Brickwork (Clay & lime sand, non-vitrified)
– Natural stone

DRI-GARD CP-700: Click here to view Product Data Sheet 
DRI-GARD CP-750: Click here to view Product Data Sheet

One-part, solvent based methyl methacrylate (MMA) protective coating. It is resistant to weathering, alkalis and ageing. DRI-GARD CF-900 is available in clear & coloured finishes, and can be used on for protection and decoration on various substrates, including concrete, masonry and steel structure.

DRI-GARD CF-900 protects concrete against aggressive attacks from the atmosphere and has a self-cleaning effect on the treated surfaces, without adversely influencing the characteristic texture of concrete.

Application Area:
Concrete, Cementitious substrates, Metal, Masonry

Click here to view Product Data Sheet

Click here to view 3rd party test report

DRI-GARD UV-920 is a 2-part, coloured, non-yellowing, UV-resistant polyurethane seal coat. DRI-GARD UV-920 is suitable to be used in external areas that are exposed to sunlight, such as bridges, flyovers, metal and concrete infrastructure.

Application Areas:

  • Metal structures
  • Concrete structures
  • Bridges
  • Flyovers

Click here to view Product Data Sheet

Two-part, chemical resistant, reaction hardening coal tar epoxy coating, in combination with mineral fillers.

DRI-GARD SW-100 can be used in sewage treatment plants, manholes exposed to sewage water, immersed piers, ballast tanks, and so on. It can also be applied as an internal or external coating for permanently immersed or buried structures, and bonds well to concrete and steel surfaces.

Application Area:
– Sewage treatment plants
– Manholes
– Immersed piers
– Steel & concrete silos
– Ballast tanks
– Marine structures
– Steel protection

Click here to view Product Data Sheet

High performance, two-part, chemical resistant, reaction hardening coal tar epoxy coating, in combination with mineral fillers.

DRI-GARD SW 180 has higher solid content compared to most ofther coatings in the market and can be used in sewage treatment plants, manholes exposed to sewage water, immersed piers, ballast tanks, and so on. It can also be applied as an internal or external coating for permanently immersed or buried structures, and bonds well to concrete and steel surfaces.

Application Area
– Sewage treatment plants
– Manholes
– Immersed piers
– Steel & concrete silos
– Ballast tanks
– Marine structures
– Steel protection

Click here to view Product Data Sheet

Two-part, versatile and durable epoxy coating that can be used for portable water and chemical tank lining. It may also be used as a floor coating. DRI-GARD PW 200 is formulated with glassflakes, which effectively protects substrates from water and other corrosive chemicals by forming an impermeable barrier. It is suitable to be applied over steel and concrete surfaces.

Application Area:
– Potable water tank lining
– Fresh water & dry food cargo lining
– Concrete substrates
– Masonry substrates
– Steel substrates

Click here to view Product Data Sheet

Solvent-free, tar-free epoxy coating that protects concrete & metal against chemicals, corrosion & abrasion in aggressive environments. It is suitable to be used in sewage linings, waste water tanks, pipe linings, manholes, and so on.

Application Area:

– Concrete & metal surfaces
– Manholes
– Tank & pipe lining
– Sewage lining
– Effluent plants
– Sea water tanks, channels & intakes
– Waste water tanks
– Secondary containments

Click here to view Product Data Sheet

Two-part, solvent-free, high performance epoxy protective coating that protects concrete & metal against corrosion & abrasion in aggressive environments. DRI-GARD TZ-300 has superior penetrating properties, flexibility and adhesion strength on wet concrete and steel substrates, making it suitable to be used where concrete surfaces are damp and cannot be completely dried out, such as tidal zones and splash zones.

Application Area:
– Tidal zones & splash zones
– Concrete substrates
– Metal substrates
– Offshore marine & petrochemical services
– Sheet piles
– Underground & submarine pipes
– Waste water tanks
– Jetty piles
– Underground tanks

Click here to view Product Data Sheet

Chemical-, corrosion- & abrasion-resistant glass flake reinforced epoxy coating that protects concrete & metal against aggressive environments. It has superior penetrating properties, flexibility & adhesion strength on wet concrete and steel substrates, making it suitable to be used where surfaces are damp and cannot be completely dried out, such as wastewater tanks, tidal zones and splash zones. 

Application Area:

– Concrete substrates
– Metal substrates
– Tank lining
– Tidal zones
– Offshore marine & petrochemical services
– Waste water tanks
– Jetty piles
– Underground tanks

Click here to view Product Data Sheet

Water-based acrylic coating containing space-age glass nanomaterial which produces thermal insulation-like properties. It is specially designed for buildings’ rooftops (metallic and inorganic materials), walls (concrete and timber), containers (such as water tanks or storage sheds) or any structures that require solar heat reflectivity.

Application Area:
– Rooftops
– Walls
– Water tanks
– Storage sheds
– Metallic / inorganic materials
-Concrete
– Timber
– Structures that require solar heat reflectivity

Click here to view Product Data Sheet

Rust converter that chemically neutralizes rust on metal surfaces to form a black protective finish. The formulation contains tannic acid, which chemically converts the rust into bluish-black ferric tannate, and organic polymers, which acts as a wetting agent & protective primer layer in conjunction with organic polymer emulsions.

Application Area:

 Metal roofs
 Railings
 Fences / Gates
 Bridges
 Towers
 Vehicles
 Structures
 Tanks
 Sheet metals
 Hard-to-sandblast areas
 Other rusted areas

Click here to view Product Data Sheet

Single-component, water-based rust converter that chemically neutralizes rust on metal surfaces to form a stable black magnetite compound. Unlike traditional rust converters which contains acids and requires thorough washing after the rust-conversion process, DRI-GARD RC-50 utilities a proprietary blend of rust stabilizing pigments that convert & fuse rust layers into a stable and ready-to-be painted black magnetite compound.

Application Area:

 Metal roofs
 Railings
 Fences / Gates
 Bridges
 Towers
 Vehicles
 Structures
 Tanks
 Sheet metals
 Hard-to-sandblast areas
 Other rusted areas

Click here to view Product Data Sheet

One-part, water-borne acrylic coating, reinforced with Teflon waxes and UV absorbers to repel water & harmful UV radiation. It can be used as a protective coating over cement-based roof tiles to enhance its appearance & weather resistant properties. It can also be used as a clear glaze coating over concrete, brickwork, asbestos cement sheets and so on.

Application Area:

  • Cement-based roof tiles
  • Concrete
  • Brickwork
  • Asbestos cement sheets

Click here to view Product Data Sheet

Ready-to-use zinc rich coating and allows galvanic protection by standard painting application methods. It is a cold galvanizing compound that effectively prevents the corrosion of steel substrates in the same manner as hot dip galvanizing. When applied to a ferrous surface, the zinc in DRI-GARD ZN-80 sacrifices itself to protect the substrate.

Application Area:

  • Steel structures
  • Reinforcement steel bars
  • Repair material for galvanized steel that has been mechanically damaged

Click here to view Product Data Sheet

Self-curing polyvinyl butyral based primer, incorporating zinc tetroxy chromate or iron oxide and other corrosion inhibiting pigments. It is designed for use as a pre-treatment primer for galvanized surfaces and light metals. It can also be used as a shop primer for marine and structural steelwork.

Application Area:

  • Galvanized surfaces
  • Light metals
  • Marine & structural steelworks
  • Steel substrates

Click here to view Product Data Sheet

High performance and quick drying aluminum paint that may be applied on iron and steel surfaces for protection against corrosion. It is used as a finish coat and may be applied using brush, roller or spray.

Application Area:
Iron surfaces, Steel surfaces

Click here to view Product Data Sheet

Dri-Gard MF-80 is a high performance decorative coating with a distinctive gold finish, and can be used to cover any surface imperfections. 

Application Areas:

  • Metal substrates
  • Masonry
  • Wood
  • Advertising material
  • Polystyrene forms
  • Stone

Click here to view Product Data Sheet

Cleaning solvent for degreasing metal, removal of paint remover residues and final cleaning prior to the application of any paints or coatings. It is compatible with a wide range of coatings, including acrylic, alkyd, epoxy, polyurethane, and so on. Dri-Gard SP-101 is also fast evaporating, and is suitable to be used for the cleaning of brushes and spray equipment.

Application Areas:

  • Metal surfaces
  • Compatible with coatings such as:
    • Acrylic
    • Alkyd
    • Epoxy
    • Polyurethane
    • Nitro-cellulose
    • etc.

Click here to view Product Data Sheet