PRODUCTS

Dritech Chemicals | Moving Forward With Innovation

Repairs & Grouts

Dritech’s range of epoxy patching mortars and grouts will allow you to overcome any challenges faced in your construction projects. 

2-component, underwater epoxy adhesive and repair mortar that is specifically designed to bond to most substrates such as concrete, stones, steel, iron, epoxy, glass, wood, polyester, fiber cement board, etc. Commonly used as a structural adhesive and mortar for sea walls refurbishments, submerge steel works or concrete repairs, fixing slip bricks, tiles or tiles pointings.

Application Area:

  • Underwater patch repairs
  • Concrete
  • Natural stones, ceramic, fibre cement, bricks, masonry
  • Steel, iron, aluminium
  • Glass, tiles
  • Polyester, epoxy substrates
  • Patching of holes
  • Void filling
  • Joint filling & crack sealing
  • Joint & crack edge repair
  • Precast concrete

Click here to view Product Data Sheet
Click here to view 3rd party test report

2-component, coarse underwater epoxy adhesive and repair mortar that is specifically designed to bond to most substrates such as concrete, stones, steel, iron, epoxy, glass, wood, polyester, fiber cement board, etc. Commonly used as a structural adhesive and mortar for sea walls refurbishments, submerge steel works or concrete repairs, fixing slip bricks, tiles or tiles pointings.

Application Area:

  • Underwater patch repairs
  • Concrete
  • Natural stones, ceramic, fibre cement, bricks, masonry
  • Steel, iron, aluminium
  • Glass, tiles
  • Polyester, epoxy substrates
  • Patching of holes
  • Void filling
  • Joint filling & crack sealing
  • Joint & crack edge repair
  • Precast concrete

Click here to view Product Data Sheet

2-component, epoxy adhesive and repair mortar that is specifically designed to bond to most substrates such as concrete, stones, steel, iron, epoxy, glass, wood, polyester, fiber cement board, etc. It is suitable to be used in damp and dry situations.

Application Area:

  • Concrete
  • Natural stones, ceramic, fibre cement, bricks, masonry
  • Steel, iron, aluminium
  • Glass, tiles
  • Polyester, epoxy substrates
  • Patching of holes
  • Void filling
  • Joint filling & crack sealing
  • Joint & crack edge repair
  • Precast concrete

Click here to view Product Data Sheet

3-component, epoxy repair mortar. Specifically designed with specific resins and filler to provide high early strength & ultimate strength. Commonly used to patch critical areas such as industrial floors, runways, bridge bearings, or any areas with high abrasion and impact requirements

Application Area:

  • Industrial floors
  • Crane rails / bridge bearings
  • Kerbstones
  • Foundation slabs
  • Joint treatments between SBG / precast concrete panels
  • Patching of holes & void filling
  • Abrasion & impact resistance wearing layer
  • Concrete runways

Click here to view Product Data Sheet

2-component, polymer modified mortar adhesive and repair mortar. Specifically designed to have a balance between flexibility & mechanical strength with higher bonding strength compared to standard patch repair mortars. Commonly used as to patch up blowholes/pinholes and patching mortar reservoir resurfacing mortar, precast concrete edge repair works or concrete repairs, thin layer surface re-profilling mortar, tilling, fixing slip bricks, tiles or tiles pointings.

Application Area:

  • Surface honeycombs
  • Patch repair
  • Resurfacing mortar for reservoirs
  • Tile on tile application
  • Tile/EIFS/cement fibre board adhesives
  • Patching of holes
  • Void filling
  • Joint filling & crack sealing
  • Joint & crack edge repair

Click here to view Product Data Sheet

One-component, flexible & elastic wall / ceiling finishing acrylic stucco. Specifically design to replace conventional skim coats. Water resistant, alkali resistant, cover and conceals cracks. It can be used as a system or on its own to replace conventional skimcoats. Application may be done using trowel, roller or spray. (Available with coarse & fine finishing)

Application Area:

  • Internal & External Walls
  • Concrete
  • Plasters
  • Light Weight Blocks
  • Cement / Gypsum Boards
    etc

Click here to view Product Data Sheet

Ready-to-use, water-based acrylic stucco, suitable for aesthetical repairs, such as hairline cracks, resurface blemishes, rough areas and small holes, at both internal and external areas. It is water resistant and has excellent resistance to hairline cracking, flaking and chalking. Application is quick and efficient and a trowel skim appearance is easily achievable. Due to its alkaline resistance, finishing paints can be directly painted on STUCCO-REPAIR 1000.

Application Area:

  • Internal & External Walls
  • Plasters
  • Surfacial Cracks
  • Resurface Blemishes
  • Rough Areas
  • Small Holes In Cement Rendered Surfaces
  • Overhead Applications

Click here to view Product Data Sheet